# trident-opm300-module-4-case

STOP! Have you read, studied, and understood all of the course materials, including the Module Home Page and the sources listed under Background Info? If you haven’t, then do so before attempting this Case.

As with all Trident courses, you’re expected to provide references and citations. It’s recommended you use the sources listed in the Module. Resist the temptation to browse the Web, looking for “clues.” There’s a lot of confusing stuff out there, and much of it is irrelevant. This Module contains all the information you need. Study it – use it!

1. Make a sketch of the feasibility region defined by the following constraints. Label the edges of the region with numbers; label the extrema with letters. Find and present the coordinates of the extrema. Assume that x and y are both equal to or greater than zero.

Version B: 2y<=2x, 2x+3y<=15, 3y>=x, x>=1

 2. The constraints on a particular manufacturing process are shown on the right. The extrema of the feasibility region have been calculated and plotted. Using the profit function given below, calculate the profit (value of P) at each extrema. P=x-2y At which extremum is the profit the maximum? The minimum? (A negative profit is a loss. The minimum profit is either the smallest positive profit, or the largest loss.)

3. Eye-Full Optics assembles astronomical telescopes (x), premium binoculars (y) and student-grade microscopes (z) from imported parts. Each telescope takes one hour to assemble, each pair of binoculars two hours, and each microscope three hours; the availability of skilled labor limits assembly work to 1000 hours per day. Eye-Full has a contract with FedEx, and must ship no less than 400 items per day. A contract with a major retailer requires them to deliver a minimum of 100 telescopes, 250 binocs, and 50 microscopes per day. But there are supply limitations. The telescopes and binocs are shipped with the same eyepieces; each scope has one, and each pair of binocs has two. The subcontractor who supplies the eyepieces can only furnish 800 per day. Similarly, both the binocs and the microscopes use the same prisms; each pair of binocs needs two, and each microscope needs four. The prism supplier can only ship Eye-Full 1600 per day.

If Eye-Full makes a profit on \$150 on each scope, \$220 on each pair of binocs, and \$300 on each microscope, how many of each should the company manufacture each day? What is its daily profit?

(Since the feasibility region is a volume in three-dimensional space, a sketch is not required.)

(HINT: Use an online app to solve Problem 3. Submit a screen shot of the output, plus an explanation.)

Please read and heed the hints given in Cases 1, 2, and 3. The same general advice is applicable in this Case, in particular:

1. Read the source materials before beginning.

2. The Case is about linear programming, not the wider topic of production planning.

3. Follow standard format. A cover page, a short discussion, references and citations are all required.

4. In case you missed it: Use an application to work out Problem 3. Insert a screen shot of the output. Be sure to provide a reference and a citation for the app you use.

Assignment Expectations

· Graphics must be neat, clear and complete. A graphics app can be used, but a freehand sketch is also acceptable.

· All calculations should be shown.

· All answers must be clearly stated.

· Relevant theory should be cited as necessary to explain which procedures were used to arrive at the answers, and why.

· There are no guidelines concerning length. Write what you need to write – neither more, nor less.

· Clearly demonstrate your understanding of both the theory covered in the Module, and the particulars of the Case.

· Provide references and citations. At a minimum, you should reference the course materials. These are referenced in APA format on the Background Info page.

### The Scholarship Jacket Poem Summary

The Scholarship Jacket Poem Summary

### The 5 W’s and H Chart

The 5 W’s and H Chart

### Help me with Business & Management assignment

1.Please calculate the Safety Stock required for each product based on the demand data in Table 1 and the values provided in